Where 7-Volt Shears Stall, This One Keeps Cutting
Two blades. One hand. No stalling. It was never your technique. Most handheld shears run on about seven volts, which is enough for soft grass and not enough for a woody stem. So the head bogs down, you push harder to finish the cut, and the gear train takes the load the blade should have taken. That is The Stall-and-Strip, and it is why the cheap one you bought last spring is already in the bin. This one puts a 24V lithium pack behind 65Mn steel blades that cut on both edges. Try it on your own hedge for 90 days.
- ✓Finish the cut instead of fighting it — a 24V lithium pack keeps blade speed in the woody stems that stall seven-volt shears
- ✓Switch tools without leaving the garden — the 5.1 in grass shear and the 9 in hedge blade swap by hand, no screwdriver, no spare parts
- ✓Reach the awkward angles standing up — the head pivots through 90 degrees, so lawn edges and hedge tops come to you instead of you bending to them
- ✓Keep a clean edge season after season — 65Mn steel blades cut on both sides and resist the rust that pits cheap steel in one damp summer
- ✓Work one-handed all afternoon — 1.98 lb with the battery fitted, so your grip lasts as long as the charge does
- ✓Start it only when you mean to — two separate controls have to be pressed together before the motor will run
I did the whole front border and both boxwoods in one go, one hand, and it never once bogged down in the woody bit at the base. — Ray D., Verified Buyer
See It Swap, Then See It Cut.
No screws and no tools: press the two release buttons, slide the grass blade off, push the hedge blade in until it seats. Then watch it take a ragged lawn edge, a boxwood that has gone shapeless, and the grass creeping along the fence line. The head is turned once by hand between the flat cuts and the vertical ones, which is the difference between crouching at a border and walking it.
Four Things That Decide Whether a Shear Lasts
Every handheld trimmer looks the same in a photograph. These are the four places they stop being the same.
The 24V Difference
Because the pack behind the blade carries 24 volts rather than the seven that most handheld shears run on, the head holds its speed when it meets something woody. That answers The Stall-and-Strip at the source: the torque arrives before you have to force the blade through.
“Went at a boxwood that had gone half-woody at the base. It slowed a touch and kept going. My last one would have just sat there buzzing at me.” — Marcus T.
Two-Second Blade Swap
Press the two release buttons, slide one blade off, push the other in until it clicks. Because there is no screw and no tool involved, the hedge blade actually gets used. A shear that needs a screwdriver from the shed is a shear that only ever cuts grass.
“I keep the hedge blade in my back pocket now. Changed it three times going round the garden and never once walked back to the shed.” — Diane W.
The 90-Degree Head
The collar behind the blade turns by hand through ninety degrees, with a stop at forty-five. Because the tool angles instead of your wrist, a lawn edge and a hedge top become the same easy posture, and you stop kneeling for one and reaching for the other.
“The angle is the bit I did not expect to care about. Doing the edge along the path used to mean crouching. Now I turn the head and walk it.” — Ken H.
Blades That Stay Sharp
The blades are 65Mn steel and cut on both sides, so each stroke shears twice instead of tearing once. Because that steel resists corrosion, a wipe-down after a damp morning is the whole of the maintenance, and the pitting that blunts cheap blades in a single season never gets started.
“Second season on the same pair of blades. Wiped them down each time, never oiled them, still cutting clean.” — Pauline S.
Why Underpowered 7-Volt Shears End Up in the Bin
Same shape, same promise, same photograph. The difference is The Stall-and-Strip: what happens the first time the blade meets a stem that is not grass.
Folgarden 2-in-1
Underpowered 7-Volt Shears
One Tool. Every Job the Mower Leaves Behind.
Every Number, Before You Ask
What's in the Box:
1x trimmer body with the grass shear blade already fitted, 1x 9 in hedge trimmer blade, 1x blade cover, 1x 24V lithium battery, 1x charger, 1x instruction manual
Specs:
guarantee
Try it for 90 days. If you aren't completely satisfied, we'll refund every penny. No questions asked.
What Gardeners Say After a Full Season
1,284+ customers
Questions? Answered.
Get the Edges Done This Weekend
Join 1,284+ gardeners who stopped fighting an underpowered shear. Most people end up keeping one by the back door and one in the garage, so the tool is already wherever the job is. This sale ends soon and stock is running low.
Order Now & Save 50%